Automobile bearings NE 68934

Demension: 50.01×58×26mm,    Weight: 30g.

SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Outer ring fordrawncup needle roller bearings(DC type) is made of cold rolled steel strip accurately 

formed.Structure of DC needle roller bearings features space saving and higher capacity.They are suitable 

for applications with limited space and housing not hard enough to act as raceway. No requirement on axial 

location when the DC needle roller bearing is pressed into the housing.

In most applications inner ring is not necessary for DC needle roller bearings unless shaft raceway is 

impractical,standard inner rings for DC to compare with open end DC needle roller bearings, close end DC 

needle roller bearings are good for sealing at the close end of bearings,operating temperature range for 

bearings grease lubricatedare 20℃ to +120℃.

Automobile bearings NE 68934

1. Inspection the enveloping circle diameter

    The dimensional accuracy of drawn cup needle roller bearings cannot be measured before fitting

    without a ring gauge as the thin-walled outer ring can be out of round due to the manufacturing process.

    The bearings obtain the accuracy required for their correct function only when pressed into ahousing

     bore which must be manufactured with the recommended tolerance limits.

     The enveloping circle diameter can then be checked as follows:

a.   Press the bearing into a steel ring gauge(wall thickness≥20mm).The bore dimension of the ring

    gauge must correspond to that given.

b.   Measure the enveloping circle diameter with cylindrical go and no-go gauge plugs.

 All sorts of needle roller bearing and parallel roller bearing as well as inch-system needle roller 

bearing used for all kinds of automobiles can be provided by our company, including home-made car, micro-

car,minibus, heavy truck, light truck, dump body truck, loader and agricultural trucks.

Automobile bearings NE 68934