Spherical roller bearings

Boundary Dimension: 1120*1360*243mm,   Weight: 728kg.

Spherical roller bearings have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.

Spherical roller bearings are leading in design and can, in addition to high radial loads, accommodate high axial loads acting in both directions.

The standard range of SKF spherical roller bearings comprises
- open bearings
- sealed bearings
- bearings for vibratory applications.

In addition to the standard range, offers a wide range of special spherical roller bearings adapted for specific applications.

Spherical roller bearings

1.Open bearings

Spherical roller bearings are produced in several designs, depending on bearing series and size. The differences are
- the arrangement of the floating guide ring as well as
- the design of the inner ring and/or cages,
as described in the following.

C(J), CC--Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

EC(J), ECC(J)--Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.

CA--One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring

CAF-- As CA, but with a steel cage.

ECA, ECAC-- Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.

ECAF-- As ECA, but with a steel cage.

E-- For bearings with a bore diameter d ≤ 65 mm: Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

CAFA-- One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring

With some exceptions, all SKF spherical roller bearings are produced with a cylindrical bore as well as with a tapered bore. The tapered bore of bearings in the

- other series have a taper of 1:12, designation suffix K.

Spherical roller bearings