Spherical roller bearing 22348 CA W33

Boundary Dimension: 240×500×155mm ,   Weight: 153kg.

Shape location tolerance should be to current standard.

Spherical roller bearing have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.

Spherical roller bearing are leading in design and can, in addition to high radial loads, accommodate high axial loads acting in both directions.

Spherical roller bearing 22348 CA W33

The standard range of SKF spherical roller bearings comprises
- open bearings
- sealed bearings
- bearings for vibratory applications.

In addition to the standard range, offers a wide range of special spherical roller bearings adapted for specific applications.

Spherical roller bearing, whose inner rings have two raceway, and outer raceways are spherical. The centers of curvature of outer raceways are also the bearing centers. The bearings possess self-aligning performance, the permissible disalignment angle is 1-2.5 degree, and can be used in certain permanent deflective application.

These bearings are able to carry high radial loads, as well as axial loads at the same time, but not pure axial loads, the axial carrying bearing will be needed if axial loads were higher. The contact between rollers adn raceways are so close, so the friction is higher than cylindrical roller beairngs, and their limiting speed is lower.

Spherical roller bearing 22348 CA W33

The basic types of spherical roller bearings are type C and CA, according to different cages and whether inner rings are with ribs. Type C beairng has inner ring without rib, and use steel pressed cage. type CA bearing has inner ring with two ribs, and adopt machined solid cage.

Spherical roller bearings are especially suitable for applications required heavy or shock loads.

Spherical roller bearing

1.Open bearings

Spherical roller bearings are produced in several designs, depending on bearing series and size. The differences are
- the arrangement of the floating guide ring as well as
- the design of the inner ring and/or cages,
as described in the following.

C(J), CC--Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

EC(J), ECC(J)--Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.

CA--One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring

CAF-- As CA, but with a steel cage.

ECA, ECAC-- Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.

ECAF-- As ECA, but with a steel cage.

E-- For bearings with a bore diameter d ≤ 65 mm: Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

CAFA-- One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring

With some exceptions, all SKF spherical roller bearings are produced with a cylindrical bore as well as with a tapered bore. The tapered bore of bearings in the

- other series have a taper of 1:12, designation suffix K.

Spherical roller bearing 22348 CA W33

Boundary Dimensions				Basicload ratings		Designations	Mass	LimitingSpeeds
mm				KN		r/min
d	D	B	rmin	Cr	Cor	Current	kg	Grease	Oil
460	680	163	6	2460	6670	23092	223	400	500
	680	163	6	2460	6670	23092/W33	223	400	500
480	650	128	5	2060	5000	23996	162	400	500
	650	128	5	2060	5000	23996/W33	162	400	500
	700	165	6	2500	6440	23096	231	380	480
	790	248	7.5	5200	10700	23196/W33	486	300	380
	870	310	7.5	7850	14400	23296	837	260	340
500	670	128	5	2100	5250	239/500	135	400	500
	720	167	6	2700	7180	230/500	238	380	480
	720	167	6	2700	7180	230/500 W33	238	380	480
	920	336	7.5	8430	15800	232/500 W33	1020	240	320
530	780	185	6	3180	8310	230/530	313	340	430
	780	185	6	3180	8310	230/530 W33	312	340	430
560	820	195	6	3490	9950	230/560	367	320	400
	820	195	6	3490	9950	230/560 W33	365	320	400
	920	280	7.5	7100	14800	231/560 W33	757	240	320
600	870	200	6	3760	10400	230/600	417	300	380
	980	375	7.5	10200	21600	241/600	1079	180	240
630	920	212	7.5	4170	11500	230/630	511	260	340
	920	212	7.5	4170	11500	230/630 W33	509	260	340
670	900	170	6	3700	9600	239/670 W33	317	260	340
	980	230	7.5	6865	15000	230/670	657	240	320
	980	230	7.5	6865	15000	230/670 W33	655	240	320
710	950	180	6	3950	10500	239/710	389	240	320
	950	180	6	3950	10500	239/710 W33	387	240	320
	1030	236	7.5	6250	14900	230/710 W33	742	220	300
	1150	438	9.5	13900	30500	241/710 W33	1802	150	190
800	1060	258	6	6240	15200	249/800 W33	638	180	240
	1150	258	7.5	8350	19100	230/800 W33	986	190	260
	1150	345	7.5	10900	26300	240/800	1246	170	220
850	1220	365	7.5	11600	28300	240/850	1398	160	200
	1220	365	7.5	11600	28300	240/850 W33	1395	160	200
	1220	365	7.5	11600	28300	240/850 W33/YA1	1396	160	200
900	1280	375	7.5	12800	31500	240/900 W33	1783	150	190
1000	1420	412	7.5	15300	38500	240/1000 W33	2117	100	140
1060	1400	250	7.5	9300	24400	239/1060CA/W33	1020	100	140