Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material: Si3N4,

Ceramic ball bearing

Demension: 5X19X6mm

Full ceramic (All -ceramic) ball bearing of ZrO2 material

Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working, especially high and low-temperature application,etc.Could be used in awful environment and specially condition. The rings and balls made by full ceramic material: ZrO2, as a standard constructure, the cage made by PTFE, generally we also could make the cage with GRPA66-25, PEEK, PI, AISI SUS304,SUS316,Cu,etc.

Full ceramic (All -ceramic) bearing of Si3N4 material

Ceramic ball bearing

Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material: Si3N4, as a standard constructure, the cage made by PTFE,generally we also could make the cage with GFRPA66-25, PEEK, PI, phonemic textiles tube, etc. Compares than the material of ZrO2. The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle, the manufactured clearance could be P4 to up grade.

Full ceramic (All-ceramic) ball bearings fo full complement balls

Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no cage design, the bearing able to install more ceramic balls than the standard construction, so the heavier radial load ability increased more.resistance and high temperature application. This series of bearing is not for high speed choice, it should be to install on the unforced.

Full ceramic (All-ceramic) bearing of ceramic cage

Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, ceramic bearing can be used in the most inclemency environments as corrosive,low temperature, high vacuum. The normal used ceramic materials with ZrO2.

Hybrid construction ceramic ball bearing

Ceramic ball especially Si3N4 have the following performance as low density, high strength, low friction coefficient, electrical and magnetism resistance, wear resistance, well rigidity, lubrication and maintenance free when working, it is the best choice for rollers(inner ring and outer ring are made by metal) of the hybird construction ceramic ball bearing which are used in high-speed,high accuracy and long life environments. Normally, GCr15 or AISI44C, 316 ,304 makes inner ring and outer ring; The ceramic ball can adopt ZrO2, Si3N4 or Sic.

PO grade tolerance of inner ring( For ceramic and stainless bearings)

d(mm)		dmp		Vdp2)			Vdmp	Kia	Bs			VBS
Over	To	Upper deviation	Lower deviation	9	0,1	2,3,4	max	max	Upper deviation	Lower deviation
0.6	2.5	0	-8	10	8	6	6	10	0	-40	-250	12
2.5	10	0	-8	10	8	6	6	10	0	-120	-250	15
10	18	0	-8	10	8	6	6	10	0	-120	20
18	30	0	-10	13	10	8	8	13	0	-120	-250	20
30	50	0	-12	15	12	9	9	15	0	-120	-250	20
50	80	0	-15	19	19	11	11	20	0	-150	-380	25
80	120	0	-20	21	21	15	15	25	0	-200	-380	25
120	180	0	-25	35	35	19	19	30	0	-250	-500	30
180	250	0	-30	38	38	23	23	40	0	-300	-500	30

PO grade tolerance of outer ring( For ceramic and stainless bearings)

D(mm)		Dmp		Vdp2)				VDmp	Kea	Cs	Vcs
Over	To	Upper deviation	Lower deviation	9	0,1	2,3,4	2,3,4	max	max	Cis	VCis
2.5	6	0	-8	10	8	6	10	6	15	Bs,VBs the same
6	18	0	-8	10	8	6	10	6	15
18	30	0	-9	12	9	7	12	7	15
30	50	0	-11	14	11	8	16	8	20
50	80	0	-13	16	13	10	20	10	25
80	120	0	-15	19	19	11	26	11	35
120	150	0	-18	23	23	14	30	14	40
250	180	0	-25	31	31	19	38	19	45
180	250	0	-30	38	38	23	23	50
250	315	0	-35	44	44	26	26	60

Ceramic ball bearing