Needle roller bearings, drawn cup HK08×14×10

Demension: 08×14×10 mm ,    Weight: 5.8g.

SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Outer ring fordrawncup needle roller bearings(DC type) is made of cold rolled steel strip accurately formed.Structure of DC needle roller bearings features space saving and higher capacity.They are suitable for applications with limited space and housing not hard enough to act as raceway. No requirement on axial location when the DC needle roller bearing is pressed into the housing.

Needle roller bearings, drawn cup HK08×14×10

In most applications inner ring is not necessary for DC needle roller bearings unless shaft raceway is impractical,standard inner rings for DC to compare with open end DC needle roller bearings, close end DC needle roller bearings are good for sealing at the close end of bearings,operating temperature range for bearings grease lubricatedare 20℃ to +120℃.

1. Structures of various series of drawn cupneedlerollers
     Metricseries: HK, BK, F, FH, FY, MF, MFH,MFY
     Inch series: SCE, BCE, SCH, BCH,SN, B, BH, M, MH
     HK: Caged, with open ends
     BK: Caged, with open ends
     F : Full complement, with open ends
     FH : Full complement,withopenends(Heavy series)
     FY : Full complement, grease retained,withopenends
     MF : Full complement, with closed ends
     MFH:Fullcomplement, with closed ends(heavy series)
     MFY: Fullcomplement,withclosed ends
     SCE: Caged, with open ends
     BCE:Caged, withclosedends
     SCH: Caged, with open ends(heavy series)
     BCH: Caged,withclosed ends(heavy series)
     SN   : Full complement, greaseretained,withopen ends
     B    : Full complement, with open ends
     BH   :Fullcomplement, with open ends(heavy series)
     M    : Fullcomplement,withclosed ends
     M H: Full complement, with closedends(heavyseries)
2. Inspection the enveloping circle diameter
    The dimensional accuracy of drawn cup needle roller bearings cannot be measured before fitting
    without a ring gauge as the thin-walled outer ring can be out of round due to the manufacturing process.
    The bearings obtain the accuracy required for their correct function only when pressed into ahousing
     bore which must be manufactured with the recommended tolerance limits.
     The enveloping circle diameter can then be checked as follows:
a.   Press the bearing into a steel ring gauge(wall thickness≥20mm).The bore dimension of the ring
        gauge must correspond to that given.
b.   Measure the enveloping circle diameter with cylindrical go and no-go gauge plugs.

INA	TORR	NSK	IKO
HK0306	HK0306	FJP-36	TLA36Z
HK0408	HK0408	TLA48Z
HK0509	HK0509	FJ-59	TLA59Z
HK0608	HK0608
HK0609	HK0609	FJ-69W	TLA69Z
HK0709	HK0709	FJ-79W	TLA79Z
HK0808	HK0808
HK0810	HK0810	FJ-810W	TLA810Z
HK0908	HK0908
HK0910	HK0910	FJ-910W	TLA910Z
HK0912	HK0912	TLA912Z
HK1010	HK1010	FJ-1010W	TLA1010Z
HK1012	HK1012	TLA1012Z
HK1015	HK1015	TLA1015Z
HK1210	HK1210	FJ-1210	TLA1210Z
HK1212	HK1212	FJH-1212W	TLA1212Z
HK1312	HK1312	FJ-1312	TLA1312Z
HK1412	HK1412	FJ-1412	TLA1412Z
HK1416	HK1416	TLA1416Z
HK1512	HK1512	FJ-1512	TLA1512Z
HK1516	HK1516	FJ-1516	TLA1516Z
HK1522	HK1522	TLA1522Z
HK1612	HK1612	FJ-1612	TLA1612Z
HK1616	HK1616	FJ-1616	TLA1616Z
HK1622	HK1622	TLA1622Z
HK1712	HK1712	FJ-1712	TLA1712Z
HK1812	HK1812	FJ-1812	TLA1812Z
HK1816	HK1816	FJ-1816	TLA1816Z
HK2010	HK2010
HK2012	HK2012	FJ-2012	TLA2012Z
HK2016	HK2016	FJ-2016	TLA2216Z
HK2020	HK2020	FJ-2020W	TLA2020Z
HK2030	HK2030	TLA2030Z
HK2210	HK2210
HK2212	HK2212	FJ-2212	TLA2212Z
HK2216	HK2216	FJ-2216	TLA2216Z
HK2220	HK2220	FJ-2220	TLA2220Z
HK2512	HK2512	TLA2512Z
HK2516	HK2516	FJ-2516	TLA2516Z
HK2520	HK2520	FJ-2520W	TLA2520Z
HK2526	HK2526	FJ-2526	TLA2526Z
HK2538	HK2538	TLAW2538Z
HK2816	HK2816	FJ-2816W	TLA2816Z
HK2820	HK2820	FJ-2820W	TLA2820Z
HK3012	HK3012	TLA3012Z
HK3016	HK3016	FJ-3016L	TLA3016Z
HK3020	HK3020	FJ-3020	TLA3020Z
HK3026	HK3026	FJ-3026	TLA3026Z
HK3038	HK3038	TLAW3038Z
HK3512	HK3512	FJ-3512	TLA3512Z
HK3516	HK3516	FJ-3516	TLA3516Z
HK3520	HK3520	FJ-3520	TLA3520Z
HK4012	HK4012	DB504003W	TLA4012Z
HK4016	HK4016	FJ-4016	TLA4016Z
HK4020	HK4020	FJ-4020W	TLA4020Z
HK4512	HK4512
HK4516	HK4516	TLA4516Z
HK4520	HK4520	FJ-4520	TLA4520Z
HK5020	HK5020	TLA5020Z
HK5025	HK5025	TLA5025Z
HK5520	HK5520	TLA5520Z
HK5528	HK5528
HK6012	HK6012
HK6020	HK6020
HK6032	HK6032

Needle roller bearings, drawn cup HK08×14×10